3Com OfficeConnect 3CR100A97, User Manual

Page: 69 / 177

Configuring RFC 1483-MER 6 - 11
5 Enter the VPI (Virtual Port Identifier) Number that was provided by your
Service Provider in the
VPI Number field.
6 Enter the VCI (Virtual Circuit Identifier) Number that was provided by your
Service Provider in the
VCI Number field.
7 Select RIPv2 (unless instructed otherwise by your Service Provider) from
the IP Routing Protocol drop-down menu.
8 Click Apply to save your changes to the WAN Configuration page. The
system will display a status window informing you it is processing the
information you entered on the WAN Configuration page.
If you click Reset , all changes you made on this page will be deleted, and
the fields will be re-set to their default values.
9 Click SaveAll on the upper right portion of the OfficeConnect Gateway
menu bar to save your changes permanently.
The PVC you created is now listed in the PVC Name drop-down list.