3Com OfficeConnect 3C840, User Manual

Page: 202 / 222

E-12 A
PPENDIX
E: C
ONFIGURATION
(N
ON
-S
ETUP
W
IZARD
)
OF THE
O
FFICE
C
ONNECT
R
EMOTE
840
You cannot use an unnumbered Local IP WAN Address and have PAT
enabled.
6 If you are routing IPX, press the Next button to proceed to the IPX
Modify screen. If you are not routing IPX, press Modify to complete
the remote site configuration.
Step 4: Configuring
the Remote Site IPX
Network Information
1 If you are routing IPX, complete the entries in this page. Otherwise,
press the
Modify button to complete your remote site configuration,
and then press the Save Configuration button.
2 Select the option in the IPX WAN Network Address box.
■
Select Unnumbered or, if the remote site administrator provided an
IPX address for the WAN connection, select
Numbered and then
enter the address.
■
To automatically learn IPX RIPs and SAPs, set the IPX Routing option
to Both .
3 Check the Enable IPX checkbox.
4 Press the Modify button to finish the configuration of the remote site.
840ug.book Page 12 Friday, July 7, 2000 2:23 PM