3Com OfficeConnect 3C840, User Manual

Page: 39 / 222

2
S
YSTEM
A
DMINISTRATION
Performing System
Administration
Tasks
This section describes the details for performing the following System
Administration OfficeConnect Remote 840 Manager tasks:
■
“Controlling Login and Telnet Access”
■
“Modifying the Date and Time”
■
“Restoring Factory Defaults”
■
“Updating OfficeConnect Remote 840 Software”
■
“Controlling SNMP Access”
■
“Controlling TFTP Access”
■
“Assigning SNMP Trap Managers”
■
“Assigning Syslog Managers”
Controlling Login
and Telnet Access
This allows you to set up management access security. The configured
username and password combination allows web browser and Telnet
access. Connecting to the OfficeConnect Remote 840 with a web
browser allows you to configure and monitor your unit using the
OfficeConnect Remote 840 Manager. Connecting using Telnet on a
workstation allows you to remotely manage the unit using CLI.
A default user name of root and password !root are provided by DHCP
Smart Mode and the IP Wizard during the initial installation. For secure
access, you should add a private login name and password and delete the
default name.
840ug.book Page 1 Friday, July 7, 2000 2:23 PM