3Com OfficeConnect 3C840, User Manual

Page: 5 / 222

Adding a Remote Site Profile 3 - 2
Modifying a Remote Site Profile 3 - 3
Deleting a Remote Site Profile 3 - 3
Configuring Network Service Information (PPP / RFC 1483 / RFC 1490) 3 - 4
Frame Relay 3 - 5
Configuring ATM Information 3 - 6
ATM Modify Screen 3 - 6
Configuring Protocol Parameters 3 - 8
Monitoring Remote Site Connections 3 - 8
4
C
ONFIGURING
IP R
OUTING
Introduction 4 - 1
Overview 4 - 1
Enabling IP Routing 4 - 2
Configuring IP for the LAN 4 - 2
Adding a Local IP Network 4 - 3
Resetting Parameters 4 - 4
Modifying or Deleting an IP Network 4 - 4
Configuring IP RIP on the LAN 4 - 5
Local Site (LAN) RIP 4 - 5
Advanced RIP Modification Options 4 - 5
Resetting Parameters 4 - 6
Configuring IP for the Remote Site Connection 4 - 7
Configuring IP Parameters for the Remote Site 4 - 7
Configure the Remote Site IP Network Information 4 - 8
Configuring IP RIP on a Remote Site 4 - 10
Configuring IP Static and Framed Routes 4 - 11
Adding a Static IP Route to the LAN 4 - 11
Adding a Framed IP Route to a Remote Site 4 - 11
Using IP Address Validation 4 - 12
MAC-Encapsulated Routing 4 - 13
Monitoring 4 - 14
IP Testing (PING) 4 - 14
Option 1: OfficeConnect Remote 840 Manager Ping to ISP or Remote Site Network 4 - 14
840ug.book Page 5 Friday, July 7, 2000 2:23 PM