3Com OfficeConnect 3C840 User Manual Download Page 111

Page: 111 / 222

Configuring IPX RIP and SAP

9-11

Remote Site (WAN)

RIP and SAP

IPX RIP and SAP parameters can be configured on the remote site IPX
Modify screen.

Access this screen by going to the OfficeConnect Remote 840 home
page.

Select

Configuration > Remote Sites (WAN)

, and click

Modify

. This

will access the

Remote Sites General Modify Screen

Continue clicking

Next

to advance through the

ATM Modify

IP Modify

and

IP Advanced Modify

screens.

Click

Next

to proceed to the

IPX Modify

screen.

Using the

IPX Routing

box, select the mode for RIP and SAP operation:

■

Broadcast

— Send RIP and SAP packets.

■

Broadcast & Listen

— Learn from RIP and SAP packets and send RIP

and SAP packets.

■

Listen

— Learn from received RIP and SAP packets.

■

Respond Only

— Only respond to received RIP and SAP packets.

■

None

— Neither send nor receive RIP and SAP packets.

840ug.book Page 11 Friday, July 7, 2000 2:23 PM

Summary of Contents for OfficeConnect 3C840































































































































































































































Search results

Summary of Contents for OfficeConnect 3C840

Reviews:

Related manuals for OfficeConnect 3C840

Brands by name

Popular brands

3Com OfficeConnect 3C840, User Manual

Search results

Summary of Contents for OfficeConnect 3C840

Reviews:

Related manuals for OfficeConnect 3C840

Brands by name

Popular brands