3
W
INDOWS
98
OR
W
INDOWS
M
E
Installing the PC Card
1
Insert the
Installation CD
into the CD-ROM drive. The auto-start feature starts the
installation. If auto-start is disabled on your computer, click Start>Run and type
d:\setup.exe
(where d: is your CD-ROM drive).
After you insert the
Installation CD
, you may see messages telling you that the
installation is preparing your system to run your LAN+Modem card. The messages
you see depend on how your system was set up and what utilities you have used.
2
Insert the PC Card into the PC Card slot as shown in Chapter 1.
3
Respond to the prompts as they appear.
During the installation process, you may receive prompts for the PC Card
Installation CD
. Insert the CD and select the path from the drop-down list. Click
OK
. The path is d:\install\disks\win9x\drivers, where d: is your CD-ROM drive.
During the installation process, you may receive prompts for the Windows 98 or
Windows Millennium (ME) installation CD. Insert the CD and indicate the correct
path.
If you have not previously installed networking, you may be prompted for
information about your network. See your network administrator for this
information.
4
If you are prompted, restart your computer.
Modifying Audio
Settings
With the default audio settings for Windows 98 and Windows ME, you may not
hear the sound from the modem when you dial out. To enable the sound, use the
following procedure:
1
Locate the speaker icon in the system tray.
If there is no speaker icon in the system tray, open the Control Panel and
double-click
Multimedia
. On the Audio page, make sure
Show volume control on
the task bar
is checked
2
Double-click the
speaker
icon in the system tray.
3
When the
Master Out
window opens, select
Options
.
4
Choose
Properties
and make sure the
Mono In
box is checked. Click
OK
.
5
When the
Master Out
window is redisplayed, check
Mono In Balance
. Ensure that
the mute box is unchecked.
If this does not solve the problem, refer to “Troubleshooting” on page 18.
If you are reinstalling the card, make sure you have completed the procedures
for “Uninstalling the Card” on page 17.
