3Com OfficeConnect 3C100XF, Cli User'S Manual

Page: 24 / 260

1-6 C
HAPTER
1: U
SING THE
C
OMMAND
L
INE
I
NTERFACE
(CLI)
Page Break Commands
The Terminal Settings Page Break commands lets an Administrative user to enable
or disable page breaks for commands which display text that would overflow the
boundaries of the display screen.
The Terminal Settings Page Break commands can be applied globally or locally.
enable command
global_terminal_settings_
page_breaks
Allows an administrative user to globally (for all OfficeConnect Gateway sessions)
enable page breaks for commands which display text - list, show, etc. - that would
otherwise overflow the boundaries of the display screen.
To set the number of rows displayed globally and locally see the set command.
disable command
global_terminal_settings_
page_breaks
Disallows page breaks for all users.
disable command
local_terminal_settings_p
age_breaks
Disallows page breaks for locally (the present session only) connected users.
enable command
local_terminal_settings_p
age_breaks
Allows an administrative user to locally (for the present session only) enable page
breaks for commands which display text - list, show, etc. - that would otherwise
overflow the boundaries of the display screen.
To set the number of rows displayed globally and locally see the set command.
Command Line
Commands
The set command lets you configure the following command line parameters:
set command The set command has the following parameters:
global_terminal_settings_rows <number>
history <number>
idle_timeout <interval>
local_prompt <string>
local_terminal_settings_rows <number>
login_required [no | yes]
prompt <string>
These command line parameters are described in the following table.
Parameters
Description
global_
terminal_
settings_rows Configures the page size (number of rows) output by CLI commands to
subsequent OfficeConnect Gateway-connected sessions of administrative
users. This command is not effective for currently connected users. The range
is
1-256 . The default is 23 .
history Sets depth of the buffer holding command history. Use history command to
see current depth and list of your last CLI commands. The default is
10
commands . The range is 1-500 .
idle_timeout Sets login connection to close after being idle for the specified interval, if that
user is required to log in (login_required), value must be set to YES. The range
is 0-60 minutes. The default is 5 min. Zero (0) value produces no timeout. This
value can be changed only by an Administrative user.