3Com OfficeConnect 3C100XF, Cli User'S Manual

Page: 187 / 260

23
S
ECURITY
A
SSOCIATION
(SA)
C
OMMANDS
Overview
This section describes the Security Association commands accessible from the CLI.
An SA is an instantiation of a security relationship between communicating peers.
Both IP security protocol (IPSec) and internet key exchange module (IKE) require
and use SAs to identify the parameters of their connections.
The following table identifies the SA commands described in this chapter.
SA Commands
Delete Command
delete sa
<0, 2147483647>
Deletes the security association (SA) specified. A value of 0 deletes all the SA's in
the system. The
list sa command displays all the valid SAs in the system. The
show sa command shows the details of a security association.
List Command
list sa
Lists all the (phase 1 and phase 2) valid security associations (SA) in the system.
The
show sa command shows the details of a security association. The delete sa
command deletes a specified SA.
Show Command
show sa
<0, 2147483647>
Shows the details of the security association (SA) specified. The list sa command
displays all the valid SAs in the system. The delete sa command deletes a specified
SA.
Command
Type Command Name
Delete delete sa <0, 2147483647>
List list sa
Show show sa <0, 2147483647>