3Com OfficeConnect 3C100XF, Cli User'S Manual

Page: 23 / 260

History Commands 1-5
History Commands
The history command displays previously entered CLI commands. Recall
commands from the history cache by using Ctrl p to recall commands up the list,
and Ctrl n to recall commands working down the list.
history
The default depth is 10 commands. The range is 1-500 . You can modify history
depth using the set history <1-500> command.
For example:
Save All Command
The Save All command saves all changes made during your CLI session. You
should save your changes frequently, just as you would with any type of editor. It is
important to remember that most commands may be accepted when entered, but
not necessarily
saved across reboots until you use the Save All command
save all
When a Save All is in progress, the following message is displayed:
When the save is finished , the following message is displayed:
Save Configuration
Command
The save configuration command saves individual configuration files (.CFG) to a
bulk configuration file for uploading to the OfficeConnect Gateway.
save configuration You can name the bulk configuration file with the set bulk_file <file_name>
command. The reset command breaks out individual configuration files from the
bulk configuration file.
arp
arm camus
arp camus
arp carrot
li int
hosT cassatt
host carrot
Saving ... SAVE ALL
Saving.....
SAVE ALL Complete.