3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print..., User Manual

Page: 54 / 94

54 C
HAPTER
6: S
PECIAL
F
EATURES
Changing the IPP Port Settings
After the IPP port is created, you can reach the screen shown in Figure 27
using the Windows Port Settings button:
1 Open the Printers folder ( Start - Settings - Printers )
2 Right-click the IPP Printer, and select Properties .
3 Locate and click the Port Settings button ( Details or Port tab, depending
on your version of Windows).
There are two settings - Retry Interval and Retry Count - which can be
adjusted if you have problems connecting to the IPP Server.
■
Retry Interval sets the time interval (in seconds) between connection
attempts. Increase this number if you have a poor connection, or the
remote server is very busy.
■
Retry Count sets how many connection attempts will be made.
Increase this number if you have a poor connection, or the remote
server is very busy.
IPP Client Setup -
Windows 2000/XP
Windows 2000 and XP have their own IPP Client, and there is no need to
install the supplied IPP Client Software. To use the Windows IPP Client
with the Print Server, follow this procedure:
1 Start the Add Printer wizard.
2 Select Network Printer , and click Next to see the Locate your Printer
screen, as shown below.