16
B
EFORE
Y
OU
B
EGIN
Record the access point MAC address in a safe place before the access point is
installed in a hard-to-reach location. The MAC address is printed on the back of
the access point housing.
The following illustration shows the front and rear views of the access point,
including the LEDs and connecting ports.
C
ONNECTING
THE
S
TANDARD
A
NTENNAS
The Access Point 8200 is supplied with standard detachable antennas. These
should be attached before the access point is installed. If using an alternate
antenna, see “Selecting and Connecting a Different Antenna Model” on
page 22.
1
Carefully unpack the standard detachable antennas.
LEDs
Reset
button
Console port
Ethernet port
Access Point 8500
Access Point 8200/8700
Caution:
Do not connect a telephone cable into the Console port; doing so can
cause serious damage to the access point.
CAUTION:
Do not handle the antenna tips, especially after they are connected
to the access point, as this could lead to electrostatic discharge (ESD), which
could damage the equipment.
