27
B
ASIC
S
ETUP
For a basic configuration, use the Setup Wizard as described below.
At any time, you can click Home to return to the Home page of the configuration
interface. If you want to configure more advanced features, click Advanced Setup
in the Home page.
1
In the Home page, click
Setup Wizard.
2
In the “1-2-3” Setup Wizard page, click
Next
to start basic configuration.
3
In the SSID page, enter the same Service Set ID as the other wireless devices
in your network and click
Next.
(The SSID may be up to 32 alphanumeric
characters and is case sensitive.)
4
In the Channel page, select the channel options for the access point radios
and click
Next.
The channel options are:
802.11a
—You can select from these options:
■
Turbo Mode—In some countries you can use Turbo Mode, allowing the
access point to operate with a data rate of up to 108 Mbps. If Turbo Mode
is not allowed in your country, this option is not available.
■
802.11a Radio Channel—Set the operating radio channel number.
■
Auto Channel Select—When this mode is enabled, the access point selects
a radio channel automatically.
802.11b
—Set the operating radio channel number.
5
In the TCP/IP Settings page, you can choose whether the access point obtains
its IP address from a DHCP server or uses a static IP address. Configure the
DHCP Client settings and click
Next.
6
In the Security page, make selections and click
Next.
For details on security settings, see “Security” on page 37.
7
Click
Finish.
8
Click
OK
to restart the access point.
A
DVANCED
S
ETUP
The Advanced Setup pages allow you to configure features that are not available
in the basic setup. On the Home page, click
Advanced Setup
to open the
Advanced Setup menu.
After making selections and entering data on each page, click
Apply
to save the
changes.
