44
While you are configuring the
access point, the
Configuration Management
System stops responding.
To maintain wireless association, the service area and the
security settings on the client and the access point must
match exactly. Therefore, if you are associated with the
access point that you are configuring and you change the
access point service area or security, make sure to change
the client service area to match.
If you change the IP address and save the change, you
cannot continue to configure the access point using the
old IP address. Therefore, if you want to continue
configuring this access point after you save this change,
you must do the following:
1
Close your browser.
2
Return to the 3Com Device Manager Wireless Network
Tree and click
Refresh
.
3
Select the access point and click
Configure
to start a
new configuration session.
The access point cannot be
configured using the Web
browser.
Reset the access point (push the reset button located near
the access point LEDs).
After you enable the Secure
Web Server Connection, the
access point resets. When
you launch the configuration
from the 3Com Device
Manager, the browser cannot
find the configuration
web pages.
When the Secure Web Server Connection is On, you must
specify “https://” in the browser address pane to launch
the configuration.
Symptom
Solutions
