39
5
Installing NetWare Drivers
This chapter describes how to install drivers for Novell NetWare versions 4.x, 5.x and 6.x.
To obtain the latest version of a driver:
1
Go to:
http://www.3com.com/
2
Click
Downloads
.
3
Search for “3CR990” and “drivers.”
Installing and Configuring the NetWare Driver
This section describes how to install the NetWare driver on a Novell server running
NetWare 4.x, 5.x, or 6.x. The NWSERVER directory contains the network driver file
(3C99X.LAN). Additional files (NetWare Loadable Modules [NLMs]) required for NetWare
are on the
EtherCD
in the NWSERVER directory, or they can be obtained from Novell.
Using the Latest Support Packs
The 3CR990-FX-97 NIC does not support NetWare 3.x or 4.0x. The 3CR990-FX-97 NIC
does not support NetWare 4.11 servers that are not updated to the latest Novell
Support Pack.
Use the following support packs to achieve best results with the network driver.
You can obtain the latest support packs from the Novell Web site:
http://www.support.novell.com
CAUTION:
If you plan to form load balancing/failover groups using NetWare, do
not enable TCP/IP checksum offload for the 3CR990-FX-97 NIC driver.
NetWare Version
Required Support Pack
4.x
Support Pack 6 or later for all types of operation.
Support Pack 7 or higher is required for proper operation of
the failover mechanism for the 3CR990-FX-97 NIC.
5.x
Support Pack 2a or later.
6.x
Latest support pack.
NOTE:
The required support pack must be loaded before you install the driver for
the 3CR990-FX-97 NIC.
