manualshive.com logo in svg

3Com 3CBLSG48, User Manual

Share
Download
3Com 3CBLSG48 User Manual Download Page 81

C

HAPTER 

4: M

ANAGING

 D

EVICE

 S

ECURITY

0

 

Match DSCP 

— Matches the packet DSCP value to the ACL. Either  

 

the DSCP value or the IP Precedence value is used to match packets  

 

to ACLs.

 

Match IP Precedence

— Matches the packet IP Precedence value  

 

to the ACE. Either the DSCP value or the IP Precedence value is used 

 

to match packets to ACLs.

 

Action 

— Indicates the ACL forwarding action. The options are as  

 

follows: 

 

 

Permit 

— Forwards packets which meet the ACL criteria. 

 

 

Deny

 — Drops packets which meet the ACL criteria.

 Select an ACL from the ACL Name drop-down list.

 

Define the rule setup fields.

4 

Click 

Apply

. The Rule Setup settings are configured, and the device is 

updated.

Summary of Contents for 3CBLSG48








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands