manualshive.com logo in svg

3Com 3CBLSG48, User Manual

Share
Download
3Com 3CBLSG48 User Manual Download Page 74

C

HAPTER 

4: M

ANAGING

 D

EVICE

 S

ECURITY

 

VLAN ID 

— Matches the packet’s VLAN ID to the ACE. The   

 

possible field values are 1 to 4094.

 

CoS 

— Classifies Class of Service of the packet.

 

CoS Mask 

— Defines the wildcard bits to be applied to the CoS.

 

Ethertype

 — Provides an identifier that differentiates among  

 

various types of protocols.

 

Action 

— Indicates the ACL forwarding action. The options are as  

 

follows: 

 

 

Permit 

— Forwards packets which meet the ACL criteria. 

 

 

Deny

 — Drops packets which meet the ACL criteria.

 

Select the ACL Name to be deleted.

 

Select the ACL to be removed from the table.

4

 Click the Remove checkbox.

 

Click

 Apply.

 The selected ACLs are deleted, and the device is up-

dated.

Summary of Contents for 3CBLSG48








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands