3Com 3CBLSG48 User Manual Download Page 55

Page: 55 / 231

HAPTER

4: M

ANAGING

EVICE

ECURITY

Modifying System
Access

The

System Access Modify Page

allows network administrators to

modify users, passwords, and access levels using the System Access
Interface.

Monitor users have no access to this page.

Click

Administration > System Access > Modify

. The

System

Access Modify Page

opens.

Figure

System Access Modify Page

The

System Access Modify Page

contains the following fields:

User Name

— Displays the user name.

Access Level

— Displays the user access level. The lowest user

access level is Monitoring and the highest is Management.

Management

— Provides users with read and write access

rights.

Monitor

— Provides users with read access rights.

Password Modify

— Changes a password for an existing user.

Password

— Defines the local user password. Local user pass

words can contain up to 8 characters.

Confirm Password

— Verifies the password.

Select a User Name to be modified.

Modify the fields.

Click

Apply

. The User settings are modified, and the device is updated.

Summary of Contents for 3CBLSG48








































































































































































































































Search results

Summary of Contents for 3CBLSG48

Reviews:

Brands by name

Popular brands

3Com 3CBLSG48, User Manual

Search results

Summary of Contents for 3CBLSG48

Reviews:

Brands by name

Popular brands