manualshive.com logo in svg

3Com 3CBLSG48, User Manual

Share
Download
3Com 3CBLSG48 User Manual Download Page 112

C

HAPTER 7: 

A

GGREGATING 

P

ORTS

101

The

 Link Aggregation Modify Page

 includes the following fields:

 

Select Aggregation to Modify

 — Selects the Link Aggregation  

 

Group ID to modify.

 

Selected Ports

 — Allows the network manager to select ports to  

 

be added or removed from a current aggregation. The selected or 

 

deselected ports are color-coded as follows:

 

 

Blue

 — Displays a member of the modified aggregation. 

 

 

White

 — Not a member of any aggregation. 

 

 

Grey

 — Displays a member of an existing aggregation or VLAN. 

Summary

 

 

Group ID

 — Displays the Link Aggregated Group ID.

 

Type

 — Displays the type for link aggregation type the Group ID.

 

Member Ports

 — Displays the ports configured to the LAG.

  

Define the fields.

   Click 

Apply

. Link Aggregation is configured, and the application is 

 

updated.

Summary of Contents for 3CBLSG48








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands