manualshive.com logo in svg

3Com 3CBLSG48, User Manual

Share
Download
3Com 3CBLSG48 User Manual Download Page 58

C

HAPTER 

4: M

ANAGING

 D

EVICE

 S

ECURITY

4

 

Authentication Port

 — Identifies the authentication port. The  

 

authentication port is used to verify the RADIUS server  

 

 

authentication. The authenticated port default is 1812. 

 

 

Number of Retries

 — Defines the number of transmitted requests  

 

sent to the RADIUS server before a failure occurs. Possible field  

 

values are 1-10. The default value is 3. 

 

 

Timeout for Reply 

— Defines the amount of time (in seconds) the  

 

device waits for an answer from the RADIUS server before retrying  

 

the query, or switching to the next server. Possible field values are  

 

1-30. The default value is 3. 

 

 

Dead Time 

— Defines the default amount of time (in minutes) that  

 

a RADIUS server is bypassed for service requests. The range is 0- 

 

2000. The default value is 0. 

 

 

Key String

 — Defines the default key string used for  

 

 

authenticating and encrypting all RADIUS communications between  

 

the device and the RADIUS server. This key must match the RADIUS  

 

encryption.

 Define the fields.

 Click 

OK

. The RADIUS client is enabled, and the system is updated.

Summary of Contents for 3CBLSG48








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands