3Com 3CBLSG48 User Manual Download Page 191

Page: 191 / 231

HAPTER 16:

AnAgIng

EVICE

IAgnOSTICS

180

Select port

— Selects the port for mirroring or monitoring.

A port unavailable for mirroring is colored grey.

Summary

— Displays the current monitor and mirror ports.

The fields displayed are:

Monitor

— Displays the monitor port.

Mirror In

— Displays ports that are monitored on the RX.

Mirror Out

— Displays ports that are monitored on the TX.

Select a port type.

If the Mirrored port type is selected, select Mirror In or Mirror Out.

Select the ports to be monitored.

Click

Apply

. Port mirroring is enabled, and the device is updated.

The

Port Mirroring Remove Page

permits the network manager to

terminate port mirroring or monitoring.

The monitor users have no access to this page.

Click

Monitoring > Port Mirroring > Remove

. The

Port

Mirroring Remove Page

opens.

Figure 100

Port Mirroring Remove Page

Removing Port
Mirroring

Summary of Contents for 3CBLSG48








































































































































































































































Search results

Summary of Contents for 3CBLSG48

Reviews:

Brands by name

Popular brands

3Com 3CBLSG48, User Manual

Search results

Summary of Contents for 3CBLSG48

Reviews:

Brands by name

Popular brands