164
C
HAPTER
5: C
ONFIGURING
P
ATH
B
UILDER
S600 M
ODULES
, P
ORTS
,
AND
A
PPLICATIONS
Figure 127
QSIM Port Configuration Selection Menu
3
Select
[1] Port Configuration
to display the Port Configuration menu for the
selected port. This menu displays the current serial port configuration and provides
options that allow you to change certain parameters. It varies depending on the
module (QSIM, HSIM, or FAM) and on whether the link type for the port is DXI,
HDLC/SDLC, or Frame Relay. Figure 128 shows a QSIM Port Configuration menu
for a Frame Relay port.
Figure 128
QSIM Port Configuration Menu (SDLC Port)
4
Change the following parameters, as desired:
Link Type
—The input/output protocol for encapsulation and SAR to AALS
conversion.
DXI—
ATM DXI Mode 1A
HDLC/SDLC
—HDLC/SDLC frame pass-through
Frame Relay
—Frame Relay Interworking (Frame Relay Forum Specification 5
and 8; modes 1 and 2)
Summary of Contents for 3C63100-AC-C - PathBuilder S600...
