manualshive.com logo in svg

3Com 3C63100-AC-C - PathBuilder S600..., Reference Manual

Share
Download
3Com 3C63100-AC-C - PathBuilder S600... Reference Manual Download Page 221

A

T

ECHNICAL

 S

UPPORT

3Com provides easy access to technical support information through a variety of 
services. This appendix describes these services.

Information contained in this appendix is correct at time of publication. For the 
very latest, 3Com recommends that you access the 3Com Corporation 
World Wide Web site.

Online Technical 
Services

3Com offers worldwide product support 24 hours a day, 7 days a week, through 
the following online systems:

n

World Wide Web site

n

3Com FTP site

n

3Com Bulletin Board Service (3Com BBS)

n

3ComFacts

SM

 automated fax service

World Wide Web Site

Access the latest networking information on the 3Com Corporation World Wide Web 
site by entering the URL into your Internet browser:

http://www.3com.com/

This service provides access to online support information such as technical 
documentation and software library, as well as support options ranging from 
technical education to maintenance and professional services.

3Com FTP Site

Download drivers, patches, and software, across the Internet from the 3Com public 
FTP site.  This service is available 24 hours a day, 7 days a week.

To connect to the 3Com FTP site, enter the following information into your FTP 
client:

n

Hostname:  

ftp.3com.com 

(or

 192.156.136.12

)

n

Username:  

anonymous

n

Password:  

<your Internet e-mail address>

A user name and password are not needed with Web browser software such as 
Netscape Navigator and Internet Explorer.

Summary of Contents for 3C63100-AC-C - PathBuilder S600...









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands