1
R
OUTER
C
ONFIGURATION
O
VERVIEW
The SuperStack
®
II Remote Access System (RAS) 1500 and related
components are Simple Network Management Protocol (SNMP)
manageable by a RAS 1500 via a Telnet connection. The parameters you
set through these interfaces are stored in a number of tables that reside
in the card FLASH memory.
This chapter includes the following sections:
■
Setting Up Applications
■
Configuration Command Overview
■
Configurable Table Overview
Setting Up
Applications
The command line interface (CLI) allows you to perform the four basic
applications listed below. Refer to the appropriate chapter in the
SuperStack II Remote Access System (RAS) 1500 System Management
Guide
for more information.
■
Dial-In
■
Shared ISP
■
LAN-to-LAN
■
Individual Dial-Out
Configuration
Command
Overview
Configuration data is stored in several tables (user and interface tables,
for example). You can change most parameters in these tables using the
generic
set
command:
set [user|interface|system|etc.] <parameter name> <value>
Example:
set user maximillian message “Mexico is Mine”
