194
C
HAPTER
4: R
OUTER
C
OMMAND
R
EFERENCE
■
IP RIP Flags
— Type of IP RIP flags enabled.
show ip security or
show ip security
settings
Displays state (
enabled
or
disabled
) of IP security settings. The settings
shown below are defaults. See the
enable ip security_options
commands for more information.
show ip
udp_broadcast_
forwarding
Displays state (
enabled
or
disabled
) of IP upd_broadcast_forwarding. The
default for udp_broadcast forwarding is “disabled.”
show ipx or show ipx
settings
Displays settings for dynamic IPX networks. You can modify these values
using the
set ipx system
command. It lists the following:
■
Default Gateway
— Default IPX router address.
■
Name
— Designation for dynamic IPX networks.
■
Network Number
— Network number for dynamic IPX networks.
■
Max Open Sockets
— Maximum allowed number of open sockets to
remote IPX networks.
■
Max Hops
— Maximum allowed hops to remote IPX networks.
■
Priority
— Preferred ranking of dynamic IPX networks.
IP ROUTER SETTING
IP Router Administrative Status
Enabled
IP Static Remote Routes
Enabled
IP LAN Host address:
165.134.145.124
IP Autonomous System Number
1
IP Max Table Size:
1450
IP Max Metric Entries:
512
IP RIP:
Enabled
IP Number RIP Interfaces:
0
IP Number RIP Neighbors:
0
IP RIP Flags:
METRICS
SEND_REQUEST
IP SECURITY SETTINGS
Drop All Fragoffset1:
ENABLED
Drop TCP Fragoffset1
ENABLED
Disallow All Header Options
DISABLED
Disallow Source Route Options:
DISABLED
