Event Message Examples
255
To set the log level of a facility, use the following command:
set facility <facility_name> loglevel <loglevel choice>
For example, to set the loglevel of the IP facility to Unusual (only
messages that are
unusual
and
critical
are sent to the Console port) type:
set facility IP loglevel unusual
ENTER
To display the list of facilities and their associated log levels, use the
following command:
list facility
ENTER
Event Message
Examples
RAS 1500 is capable of delivering hundreds of event messages, from
common events to critical events. This section describes some
representative event messages that are generated by RAS 1500 facilities.
Each event message is categorized by the facility by which it is generated.
The message description includes information about the meaning of the
message, and if necessary, any corrective action you can take.
IP Messages
"ip_fwd_add_ondemand: ondemand route %lx exists already"
Meaning:
The administrator tried to add an ondemand user that has been
configured with a remote IP address already being used by another user
Action:
Select a different remote IP address for the user being configured
"ip_fwd_get_opt: no more IP address available for dynamic
address assignment"
Meaning:
There are no more available addresses in the IP address pool
Action:
Increase the size of the IP address pool using the
set ip pool
command
