3Com 3C421600A, Reference Manual

Page: 135 / 269

Set Commands
135
Sets daylight savings time to on.
set facility
<facility_name>
loglevel [level]
Sets the severity reporting level of a facility to display messages on the
console (your hard-wired connection to the RAS 1500) or on a PC
telnetted to the RAS 1500. Use the
list facilities
command to
view the current loglevel is for each facility. Default loglevels for most
facilities is
critical .
Do not confuse
set facility
and
set syslog
commands. The
set facility
command determines which messages are generated
on the console or to a telnetted PC, depending on the loglevel specified
for each facility. The
set syslog
command, however, determines
which messages are saved, depending on the global loglevel set for the
particular SYSLOG host. The
show event
command displays event
messages on the console if telnetted into the RAS 1500.
The log levels are the following:
■
Critical — A serious system error, which may effect system integrity.
■
Unusual — An abnormal event, which the system should recover
from.
■
Common — A regularly occurring event.
■
Verbose — A regular periodic event, for example, a routing update
message.
■
Debug — For debugging purposes only.
Parameter Description
amount_to_correct Amount of time defined in hours, minutes, and seconds set to
reflect time difference due to the start of daylight savings
time. Entered as HH:MM:SS. The second field is optional.
day_of_week Day of week daylight savings time begins.
month Name of month daylight savings time begins.
time_to_correct Denotes the time to correct to time difference due to the start
of daylight savings time. Entered as HH:MM:SS. The second
field is optional.
week_of_month Week of the month daylight savings time begins. The options
are 1, 2, 3, 4, or 5.