196
C
HAPTER
4: R
OUTER
C
OMMAND
R
EFERENCE
■
Decompression Errors
— Sum of incoming packets discarded due
to compression errors.
OUTPUT COUNTERS
■
Total Packets Transmitted
— Sum of IPX packets transmitted.
■
Forwarded Packets
— Sum of IPX packets forwarded.
■
Local Transmits
— Sum of IPX packets transmitted to local hosts.
■
Local Malformed Transmits
— Sum of IPX packets supplied locally
containing structural errors.
■
Discarded
— Sum of outgoing packets discarded.
■
Filtered Out
— Sum of packets filtered out before transmission.
■
Compression Errors
— Sum of outgoing packets discarded due to
compression errors.
■
Socket Open Failures
— Sum of outgoing packets discarded because a
socket was not available.
show ipx network
<network_name>
or show ipx network
settings
Displays parameter settings for the specified IPX network. You can modify
most of these values using the
set ipx network
command. It lists the
following:
■
Interface
— Interface this IPX network uses,
rm0/eth:1.
■
Network address
— Network address of this IPX network.
■
Frame Type
— Frame type used by the interface (
ETHERNET II
,
NOVELL_8023
,
SNAP
, or
DSAP
).
■
Maximum Packet Size
— Maximum allowable packet size for this IPX
network. Default:
1500
.
■
Status
— Operational state of the network. Default:
ENABLED.
■
Network Delay (ticks)
— Time in number of ticks it takes to reach this
IPX network. Default:
1.
■
Network Learning Retries
— Number of times this network resends
packets to discover its directly connected neighbors.
■
Diagnostics
— Sending of diagnostic packets. Default:
ENABLED.
■
NetBIOS
— Support. Default:
ENABLED.
■
NetBIOS Name Caching
— Support. Default:
DISABLED.
