•
If user sets “OFF” in “MOTION ALARM” of “DEVICE” and sets “CONT +
MOT” in “SCHEDULE”, then the system will not record anything even
though motion is detected in motion area.
Dark orange color - “Continuous” + “Sensor-activated” recording
•
The system records all the time by “continuous” as set by “CAMERA”
of “RECORD” but will switch recording mode to sensor configuration
as made by “SENSOR” of “DEVICE” if a sensor is triggered during dwell
time. The system also will notify “sensor event” message to Remote
Manager PC over the network.
•
If user sets “OFF” in “SENSOR” of “DEVICE” and sets “CONT + SENS” in
“SCHEDULE”, then the system will not record anything even though a
sensor is triggered.
Pink color - “Motion detection” + “Sensor-activated” recording
•
The system does not record in normal operation but records only
when motion is detected as set by “MOTION” of “DEVICE” and a sensor
is triggered as set by “SENSOR” of “DEVICE”.
•
If user set “OFF” in both “MOTION” of “DEVICE” and “SENSOR” of
“DEVICE”, then the system will not both record and notify to Remote
Manager PC.
4
. SETU
P
78
NOTE
Dark Blue Color
The data recorded during DST (Daylight Saving Time) will be
indicated in Dark Blue color in Intelli-Search Bar on playback mode.
4.4 RECORD
Summary of Contents for T Series
