![background image](http://html.mh-extra.com/html/360-vision/t-series/t-series_user-manual_440267066.webp)
Full control of PTZ camera is available in this menu.
“M” (Depending on the model of PTZ camera)
•
If selected, the OSD menu of PTZ camera is imported and shown on
the DVR monitor and hence user can make full PTZ setting.
Protocol
•
Select the proper protocol of the connected PTZ camera.
Address
•
Set the P/T/Z driver address of the connected camera.
Check the below items for proper P/T/Z operation.
1. Check if the protocol of the connected PTZ camera is correct.
2. Check if the communication setting including baud rate of the
connected PTZ camera is in accordance with the assigned value for
that P/T/Z protocol.
3. Check if the address of the connected PTZ camera is correct.
4. Check if wiring to P/T/Z controllers is correct.
66
4
. SETU
P
4.3.2 PTZ
4.3 DEVICE
Summary of Contents for T Series
