![background image](http://html.mh-extra.com/html/360-vision/t-series/t-series_user-manual_440267069.webp)
4
. SETU
P
69
PRESET
•
User can select the camera to move to preset position, once the
sensor is triggered. (User should setup preset position in PTZ menu
4.2.6 in advance)
DWELL (Post Alarm)
•
Set the recording period from the start of sensor input activation.
During this period, the corresponding camera image will record
according to the frame and alarm (relay) output set. The recording
stops and alarm output is turned off when the setting period is
elapsed.
PRE-ALARM
•
Set recording period in seconds just before perceiving sensor input to
up 3 seconds of time length.
•
The system records in certain seconds of time prior to the time that
alarm is activated, so that user can search video even before alarm is
triggered. The pre-alarm recording mode is always “continuous” at
the recording speed that user sets in “record” of “camera” menu.
TYPE
•
Select the sensor type between N/O(Normal Open) and N/C(Normal
Close), connecting to alarm input plate. Circuit of N/O type is usually
open, and the activation of the sensor occurs at the time of close, and
N/C type works the reverse way.
NOTIFY
•
User can select how to be alerted upon sensor is activated or motion
is triggered by pressing “NOTIFY” button.
•
The system will generate buzzer sound in the selection of buzzer, or
make pop-up screen of the camera in the selection of camera pop-up
NOTE
“Sensor” here means the alarm connected to DVR, which is
triggered by physical sensor input.
4.3 DEVICE
Summary of Contents for T Series
