Illuminator HD Installation Manual V2.1.23
Page 22
© 360 Vision Technology Ltd.
6.2.7 Network
• Camera - Cannot be edited, shows label/name given to the camera.
(See Video - Camera - page 12).
Network
The Network tab, offers options to:-
• DHCP Enable - Allows the camera to be set using a dynamic IP address.
• IP Address - Input a static IP address, if DHCP is not used.
• Netmask - Input the Network Subnet Mask.
• Default Gateway - Input the Network Gateway.
• Primary Name Server - Input the Domain name server, if required.
• MTU Size - Option to change the MTU size, default is 1500 bytes.
• Inhibit Multiple Power Cycle Method - Disables the Network recovery process
(See Network Settings Recovery - page 28)
NTP
•
NTP Server - Input the address of the time server required, default is pool.ntp.org.
MAC
•
MAC Address - Displays the camera MAC address.
Quality of Service
•
Best Effort - Will send network packets with no quality of service policies.
• Expedited Forwarding - Will send network packets with an assured bandwidth quality of service
policy.
•
Custom - Input required Hex figure for quality of service policy
•
Best Effort = 0x00
• Expedited Forwarding = 0x2E
Web Server
• HTTP access - Enable or disable HTTP access, must be connected using HTTPs.
(See Maintenance - SSL Key/Certificate -
• HTTPS Port - Set required HTTPs port. Default is 443.
OK
to apply the new settings into the Illuminator HD.
Cancel
to abandon the changes to the network settings.
