Illuminator HD Installation Manual V2.1.23
Page 19
© 360 Vision Technology Ltd.
Configuration
• Sun Shield - Feature not available.
• Auto Flip - Use this option to set how the camera behaves when full tilt down is reached.
Tilt - Requires a second tilt down command, when at full tilt down to spin camera 180°.
Limit - Automatically spins the camera 180° when full tilt down is reached.
• Attack Detect - Feature not available.
•
Upright Mount - Can be used to flip the image, so the camera can be used on a pole or a ceiling.
Default is pole.
•
Power on Park - When the camera powers up, it will go to a preset position. Preset 150. Default is off.
• Pan/Tilt Speed - Can be used to set the pan/tilt speed. Options are Normal, 20%, 40%, 60%, 80%
Slower, 20%, 40%, 60% or 80% Faster. Default is normal.
• Status Refresh Rate - Can be used to help speed up telemetry control of the camera, by slowing
down the refresh rate.
Lighting
• White Lamps - Set if white lights are to be used.
• White Timer - Set white light timer.
• Exclusion Zones- Option to be used if a white light exclusion area is to be used, set area using
presets 151 (left) & 152 (right), IR light exclusion area is required, set area using presets 153 (left) &
154 (right) or white & IR light exclusion zone.
• Auto Dimming - When selected the camera will reduce the lamp power, when looking in scenes
where there is to much light.
OK
to program the new settings into the Illuminator HD.
Cancel
to abandon the changes to the camera settings.
