Illuminator HD Installation Manual V2.1.23
Page 13
© 360 Vision Technology Ltd.
• Pan Compass - Used to display compass readings when the camera is operated.
(See PTZ zones - page 20).
• Current Preset - Used to show the stored preset text when the camera is at the preset position.
(See Advanced Features & PTZ zones - page 15 & page 20).
RTSP URL
• Copy - Use this option to copy the RTSP URL
•
Date Position - Choose date text to bottom right or left of the image.
•
Time Position - Choose time text to bottom right or left of the image.
•
Show Sub-stream - Shows second sub-stream if enabled.
OK
to program the new settings into the Illuminator HD.
Cancel
to abandon the changes to the video settings.
6.2.2 Video Advanced
Multicast -
(See Stream Tables - page 30).
Tick the box to enable ‘multicast’. If the box is not ticked then ‘unicast’ is selected.
• Multicast Stream 1 - Set IP address and port for stream 1.
• Multicast Stream 2 - Set IP address and port for stream 2.
Concurrent Uni/Multicast - Enable to allow concurrent unicast/multicast streams.
RTSP protocols allow ‘multicast’ or ‘unicast’ transmission. In addition to the ‘multicast’ feature being available on
the Illuminator HD, the ‘multicast’ feature must also be available on the receiving device.
Unicast
If lots of receivers (users) want to receive video streams from the Illuminator HD, each receiver will have a
separate video stream. This would increase the network bandwidth used. E.g. five users would require five
video streams, that typically will require five times the bandwidth.
