360 Systems MAXX-2400-HD Operation Manual Download

Page: 89 / 148

Page 88

MAXX-2400HD Owner’s Manual

Entering Network Parameters

From the GUI’s main menu bar, Click

EDIT>CONFIGURE>NETWORK

. The following

screen appears. Make sure the basic network parameters have been entered.

Figure 38 - Network Configuration Screen

Disable Network

: uncheck

Host Name

: (Any name will suffice, but since this name appears on each line of the server’s

diagnostic logs, it is a good idea to keep this short.) The name should also be unique from other
devices on the network.

If “

Use DHCP

” if not checked, then enter a fixed IP address compatible with your local subnet. For

example,

IP Address

192.168.1.20

Net Mask

: 255.255.255.0

Default Router

: 192.168.1.1

The

Name Servers

and

NTP Servers

fields provide the information needed to reach the public time

servers.

The

NTP Servers

field contains a list of time servers, either by numeric IP address, or by site name

(URL). Entries are separated by spaces.

Summary of Contents for MAXX-2400-HD





















































































































































Search results

Summary of Contents for MAXX-2400-HD

Reviews:

Related manuals for MAXX-2400-HD

Brands by name

Popular brands

360 Systems MAXX-2400-HD, Operation Manual

Search results

Summary of Contents for MAXX-2400-HD

Reviews:

Related manuals for MAXX-2400-HD

Brands by name

Popular brands