MAXX-2400HD Owner’s Manual
Page 77
When transferring files as .vfc, all of the material for the entire file is transferred. This means that:
•
Transfer of a file with head and tail points set will include portions before the head and
after the tail. The original length of the file can be accessed in a restored copy.
•
Transfer of a master file and all subclips of that file will result in duplication of
all the
material
in the master
and
the subclips. The original length of the file can be accessed
in any restored subclip. A 1 minute subclip of a 1 hour file will require the same
amount of space as the 1 hour original. Backing up both of them will require twice as
much storage as was used on the original drive. Restoring them will require twice as
much space on the server as well.
•
The size of a clip reported in the file listing is the amount of video and audio data
included in the entire clip, regardless of the settings of the In Point and Out Point.
•
To maintain the identity of the transferred clip, the time code references for its Mark-
In/Out points are maintained, as shown in
Figure 30
.
When transferring edited material, keep in mind that you are making copies of the data on the
target device. While subclips that reference the same video content on the original recordings
take up minimal extra disk space, they could take considerably more space on the target
storage.
Figure 29 – Result of an MXF file transfer
Figure 30 – Result of a VFC file transfer
00:00:00;00
00:30:00;00
00:10:00;00
(
IN POINT
)
00:20:00;00
(
OUT POINT
)
CLIP_A
Before Transfer (On Source MAXX)
00:10:00;00
00:20:00;00
CLIP_A.vfc
After Transfer (On Target MAXX)
00:00:00;00
00:30:00;00
00:10:00;00
(
IN POINT
)
00:20:00;00
(
OUT POINT
)
CLIP_A
Before Transfer (On Source MAXX)
00:10:00;00
00:20:00;00
CLIP_A.mxf
After Transfer (On Target MAXX)
Summary of Contents for MAXX-2400-HD
Page 1: ...O P E R A T I O N S manual ...
Page 9: ......
