360 Systems MAXX-2400-HD Operation Manual Download

Page: 90 / 148

MAXX-2400HD Owner’s Manual

Page 89

The nonprofit Internet Systems Consortium, Inc. (ISC) maintains sites that automatically return

lists of public time servers to an NTP client such as the server. Hence, the

NTP Servers

field is

initially filled in with the URL’s for these sites (0.pool.ntp.org, for example). Of course you can
overwrite this list with the addresses of specific time servers you may want to use. However, if you
try to clear the

NTP Servers

field it will be reset to the default list.

Note:

When URLs (non-numeric site address such as pool.ntp.org) are used in the

NTP Servers

field, you must provide the IP address of at least one DNS (Domain Name server) in the

Name

servers

field. Typically, this address is supplied by your Internet Service Provider.

These name servers translate URL names into numeric IP addresses needed to access the sites

in question.

When using a GPS-based time server which is connected directly to a local area network,

enter its numeric IP address (such as 192.168.1.60) into the

NTP Servers

field, leaving the

Name

Servers

field blank.

Also, if you know the numeric IP addresses of the public or corporate time servers on the

Internet, you can enter these addresses, separated by spaces, in the

NTP Servers

field, leaving the

Name Servers

field blank, since there would be no URLs to be resolved.

Note:

Not all Time servers allow unlimited public access. Refer to www.ntp.org for more

information.

Click the

APPLY

button to save your changes.

Summary of Contents for MAXX-2400-HD





















































































































































Search results

Summary of Contents for MAXX-2400-HD

Reviews:

Related manuals for MAXX-2400-HD

Brands by name

Popular brands

360 Systems MAXX-2400-HD, Operation Manual

Search results

Summary of Contents for MAXX-2400-HD

Reviews:

Related manuals for MAXX-2400-HD

Brands by name

Popular brands