manualshive.com logo in svg

360 Systems Instant Replay DR-554-E, Owner'S Manual

Share
Download
360 Systems Instant Replay DR-554-E Owner'S Manual Download Page 49

Instant Replay Owner's Manual

Page 49

CHAPTER FIVE – Maintenance and Disk
Operations

FORMAT INTERNAL HARD DISK

The Format Disk option for the internal drive is only available through a special "power-on"
sequence. 

This option will erase the entire contents of Instant Replay's internal hard disk

 It is

essential to back up the contents of your hard drive using the D-NET File Transfer or Backup/Restore
procedures detailed in Chapter 4 “D-NET File Transfer Operations” before beginning the Format Disk
operation.

During FORMAT DISK, if you wait too long to select an option, Instant Replay will "time out",
aborting the Format Disk operation.

CAUTION!

FORMAT DISK WILL PERMANENTLY ERASE THE CONTENTS OF THE HARD DISK .

IF AT ANY TIME THE FORMATTING PROCESS IS ABORTED, YOU MUST RECYCLE POWER

(TURN THE MACHINE OFF, THEN BACK ON AGAIN) TO ENSURE PROPER OPERATION. REPEAT

THE FORMAT PROCESS AFTER CYCLING POWER.

To Format the Internal Hard Disk

•

  Turn Instant Replay's power switch OFF.

•

  While holding down the S

TOP 

button, turn power ON. Continue to hold stop until the unit

initializes. The display will prompt:

FORMAT & ERASE DISK?

PRESS ENTER/CANCEL

•

  Press E

NTER 

to proceed, or C

ANCEL 

to abort. If you press E

NTER

, the display will prompt:

PLAY

CANCEL

•

  Press P

LAY 

to continue. The display will prompt:

FORMATTING

WAIT

After the formatting operation is complete, the display will show the initializing message, then will
indicate “NO CUTS AVAILABLE”. At this point, you may:

•

  Press R

ECORD 

and begin recording new material.

OR

•

  Press M

ENU

, select the FILE TRANSFER Menu, then select RESTORE FROM BACKUP.

Audio material previously backed up to DAT may now be restored to the hard drive via the
AES/EBU input.

OR

•

  Restore recordings from Zip disk backups.

Summary of Contents for Instant Replay DR-554-E























































Reviews:

No comments

Brands by name

Popular brands

Load more brands