manualshive.com logo in svg

360 Systems Instant Replay DR-554-E, Owner'S Manual

Share
Download
360 Systems Instant Replay DR-554-E Owner'S Manual Download Page 46

Page 46

Instant Replay Owner's Manual

After pressing E

NTER 

or C

ANCEL 

the display briefly shows the number of files transferred without

error:

FILES SENT: 0

PLEASE WAIT

If any files could not be sent, the display shows the number of files transferred without errors and the
number of files not sent due to errors:

FILES SENT: 0

FILES NOT SENT: 1

Note that Errors shown in the Transmitter are never the result of cabling or interface problems; they
reflect a problem within the unit.  Transmitter errors will also be shown on the Receiver, but Receiver
errors are shown on the Receiver only.

File Transfer (RECEIVER)

When Instant Replay is idle and FILE RECEIVE is ON, it monitors the selected RECEIVER INPUT
(XLR-3 or RCA) for a file transfer with destination name that matches the stored receiver name.
When a file transfer addressed to the Receiver begins, the display shows the following:

FILE         1 OF XX

00%  COMPLETED

•

  If Cancel or Stop is pressed, the transfer proceeds while the following prompt is

displayed:

QUIT TRANSFER?

PRESS ENTER/CANCEL

•

  Press Cancel for the transfer to proceed.

OR

•

  Press Enter to exit from the transfer. The display will show:

TRANSFER INCOMPLETE

PRESS ENTER/CANCEL

When a transfer is completed without errors, the following message appears:

TRANSFER COMPLETE

NO ERRORS

If files were received with errors, the display then shows the number of files received without errors
and the number of files discarded due to errors:

GOOD FILES:    XX

BAD FILES :        0

•

  Press E

NTER 

or C

ANCEL

. The display will briefly show:

FILES SENT:         X

PLEASE WAIT

The display then shows the number of files received without errors and the number of files discarded
due to errors:

Summary of Contents for Instant Replay DR-554-E























































Reviews:

No comments

Brands by name

Popular brands

Load more brands