360 Systems Instant Replay DR-554-E Owner'S Manual Download Page 42

Page: 42 / 54

Page 42

Instant Replay Owner's Manual

PREPARING TO BACKUP

STOP/CANCEL TO QUIT

Backup begins and the display shows the current file number and the percent completion for the
current file:

FILE 1 OF 193

00% BACKED UP

Backup will proceed until all files are backed up, and the display will show the total number of files.

If S

TOP

or C

ANCEL

is pressed during backup the display changes to:

QUIT BACKUP?

PRESS ENTER/CANCEL

Press C

ANCEL

or S

TOP

and the backup will continue. Press E

NTER

to stop backup. An ending

summary will be displayed.

Restore From Backup Procedure

The procedure for Restoring a Bank or Drive is the same. Instant Replay identifies the type of backup
automatically.

•

From the file transfer menu select RESTORE FROM BACKUP and press Enter.

•

The display changes to:

ARE YOU SURE?

PRESS ENTER/CANCEL

•

Press Enter to continue, or Cancel to exit this operation.

•

After pressing Enter the menu button begins to flash and the display shows:

START RESTORE DEVICE

STOP/CANCEL TO QUIT

•

At this time start the DAT machine playing a backup tape through its AES/EBU digital

output, and press Enter. Alternately, press Cancel to exit from this operation.

•

When backup data is received from the DAT player, the display changes to show the

current file number and the percent completion for the current file:

FILE 1 OF 193

00% RESTORED

Restore will proceed until all files are restored; the display will show the number of files successfully
restored. Files received with DAT tape errors are skipped.

If the S

TOP

or C

ANCEL

buttons are pressed, the operation continues but the display shows:

QUIT RESTORE?

PRESS ENTER/CANCEL

If you press E

NTER

the restore discontinues and an ending summary is displayed.

If you press C

ANCEL

or S

TOP

at the prompt to quit, the display reverts to updating the file number and

percentage complete and the restore operation continues.

•

After the ending summary you are prompted to press Enter. The machine resets itself

and restarts as it does when power is first applied.

Summary of Contents for Instant Replay DR-554-E























































Search results

Summary of Contents for Instant Replay DR-554-E

Reviews:

Brands by name

Popular brands

360 Systems Instant Replay DR-554-E, Owner'S Manual

Search results

Summary of Contents for Instant Replay DR-554-E

Reviews:

Brands by name

Popular brands