manualshive.com logo in svg

360 Systems Instant Replay DR-554-E, Owner'S Manual

Share
Download
360 Systems Instant Replay DR-554-E Owner'S Manual Download Page 22

Page 22

Instant Replay Owner's Manual

MACHINE SETUP MENUS

Default values are 

UNDERLINED

.  All settings are saved on disk and restored on power up.

Editing Menu

Adjust Head Point – 0.00
Adjust Tail Point – 

end of file

Set Fade In Length – Range is 0.00 to 40.00
Set Fade Out Length – Range is 0.00 to 40.00
Set Tail Pre-roll – Variable from 1 to 9 seconds.  Default is 2 sec.
Adjust Output Gain – Variable from +6 to -90 dB.  Default is 0 dB.

Refer to the section, “Audio Edit Operations” on page 15 for more information about these settings.

Record Setup Menu

Audio Input – Analog, AES/EBU XLR-3, AES/SMPTE-75 OHM RCA,

IEC-958 TYPE II RCA

Sample Rate Converter – Enabled, Disabled
Threshold (in dB) - OFF, -6, -12, -18, -24, -30, -36, -42, -48, -54, -60
Record Overwrite - OFF, ON
Record Time Limit - NONE, 60 MIN, 30 MIN, 5 MIN
Record/Erase Lockout - OFF, ON
Recording Format – AC-2, 48K Linear, 44.1K Linear
Prompt for Head/Tail – Enabled, Disabled

Refer to the section, “Recording Operations” on page 14 for more information about these settings.

Operations Menu

Change Cut Name - Changes name of currently selected Cut
Erase - Erases currently selected Cut
Move Cut - Move currently selected Cut to any unused Index number
Defragment Disk - Eliminate fragmentation of audio files on disk
Change Bank Name - Changes name of currently selected Bank
Format External Drive – Press Enter/Cancel
Select External Drive – Press Enter/Cancel

The following are available only when an EXTERNAL DRIVE is selected:

Copy Cut – Copies a single Cut to or from the Internal Drive to the External Drive
Copy Disk – Copies all Cuts to or from the Internal to the External Drive
Copy Bank – Copies a Bank including the Cuts, Hot-Key Assignments and Playlist

Configuration Menu

Time Display – TIME REMAINING, ELAPSED TIME
Sort Directory By – INDEX, NAME
Select Language – ENGLISH, SPANISH 
Digital Output – OFF, PROFESSIONAL FORMAT, CONSUMER FORMAT,

COPY PROT. CONSUMER

GPI Input – ENABLED, DISABLED
External Drive – ENABLED, DISABLED
Tail Trimmed Audio – KEEP ONLY 1ST 30 SEC, KEEP ALL

Summary of Contents for Instant Replay DR-554-E























































Reviews:

No comments

Brands by name

Popular brands

Load more brands