3 Day Blinds ROLLER SHADE Getting Started Download Page 8 | Manualshive

Page: 8 / 8

background image

| Cassettes and Side Channels

8

Part # PM-052 © 3 Day Blinds LLC 02/19

800-800-3329 | 3dayblinds.com

ANSI/WCMA A100.1-2018 5.2.2

WARNING

Young children can STRANGLE in cord and bead chain loops.

They can also wrap cords around their necks and STRANGLE.

• Always keep cords and bead chains out of children's reach.
• Move cribs, playpens, and other furniture away from cords

and bead chains. Children can climb furniture to get to cords.

• Attach tension device to wall or fl oor. This can prevent

children from pulling cords and bead chains around their

necks. Fasteners provided with the tension device may not

be appropriate for all mounting surfaces. Use appropriate

anchors for the mounting surface conditions.

«
...
6
7
8

Summary of Contents for ROLLER SHADE









Reviews:

No comments

Related manuals for ROLLER SHADE

MINI BLINDS Classic

Brand: 3 Day Blinds Pages: 6

Brand: Griesser Pages: 6

Brand: 3 Day Blinds Pages: 8

Brand: Velux Pages: 6

Brand: Decora Pages: 2

Easy Spring Wand

Brand: rollease acmeda Pages: 11

Zipscreen Extreme

Brand: rollease acmeda Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands