| Cassettes and Side Channels
4
• To raise the shade, pull down on the front of the cord loop.
• To lower the shade, pull down on the back of the cord loop.
SHADE OPERATION
SHADE REMOVAL
Start by disassembling the shade like you did in
the beginning.
• First remove the end caps on the left and right side by
sliding them towards you.
• Next remove the fascia by pushing in on the face of the
fascia and pull the innner edge down and swing out to
disengage from the end plate on each side.
• Next remove the shade from the Cassette by retracting
the pin on the idle side using the dial and turning it
counter clockwise, then pull the shade away from the
control side bracket.
• Final step is to remove the screws used to drill the
Cassette into the sill/wall. Remeber to hold onto the
Cassette as you release the screws.
