| Cassettes and Side Channels
6
INSTALLING SHADES WITH LINK
SYSTEM AND CASSETTE
• Slide control end in first.
Then retract the idle pin to
clip in the idler side.
• Rotate the center side of the
first shade into the box back,
retract the pin to engage
into the center link bracket,
and tighten the grub screw.
• Insert the second shade into
the center link bracket and
clip the idler into the idler
bracket.
• Insert the round or square
cover onto the cassette back
and rotate it down to clip
into position.
• If the cover needs to be
removed in the future,
reverse these steps and pull
the inner edge down, then
swing out to disengage from
the end plate clip.
• Align and slide the round or
square end covers onto the
end plates. You should hear
them click into place.
