25
Flexible hosepipes with connection
G1”
.
The connection and pressure tests of the heater must be done by a person with expertise in plumbing and it must
meet the applicable standards and regulations of the country.
The heat exchanger is designed for water, which may have
a maximum temperature of + 110 ° C and a maximum
pressure of 1.6 Mpa.
At the inlet and outlet of the water heater it is recommended to install a shut-off valve for the
possibility to shut off the water inlet.
The exchanger has outlets equipped with an external 1” thread and venting valve (A) and a tube for the placement
of a temperature probe (B). Before final use,
make sure that the water exchanger is completely vented.
Air curtains labeled
P2
are equipped with an antifreeze protection sensor..
CONNECT HOSEPIPES OF WATER INLET AND OUTLET
7. INSTALLATION
A
B
