2N OMEGA Lite User Manual Download Page 79

Page: 79 / 113



DHCP server enabled:

- enables DHCP server i.e.activate settings of the other

parameters in this menu.



Lease time:

- validity of a leased IP adress in seconds.



Start adress:

- start of an IP address pool.



End address:

- end of an IP address pool.



Subnet option:

- subnet mask for an internal network (LAN)



Router option:

- the default gateway of the subnet (typically the Ethernet module IP

address, for VRRP it is the IP address of the virtual router).



Primary / Secondary DNS option:

- the IP address of DNS server that will be used in

LAN PCs (device). Typically it is the IP address od Ethernet module. Other options are
IP address of the local DNS server or IP address of DNS server recommended by IP
operator.



Domain option:

- domain name of ethernet module. It could be any, but it is requested.

Empty field could make problem to PCs running some OSs.

Summary of Contents for OMEGA Lite


















































































































Search results

Summary of Contents for OMEGA Lite

Reviews:

Related manuals for OMEGA Lite

Brands by name

Popular brands

2N OMEGA Lite, User Manual

Search results

Summary of Contents for OMEGA Lite

Reviews:

Related manuals for OMEGA Lite

Brands by name

Popular brands