2N OMEGA Lite User Manual Download Page 51

Page: 51 / 113

4.6.4. Remove Rule

Tick off the checkbox in the second column of the respective row and push

the

Remove

button to delete a routing rule

4.6.5. Change Sequence

The rule sequence changing procedure is similar to that of the rule removal.

Check off the respective row and click on the

Shift up

Shift down

key.

4.6.6. Disable/Enable Rule

We already know that only an enabled routing rule may affect the routing

process. You can change the

Enabled

status while setting and/or changing a rule.

Or, just by clicking on the checkbox in the third column of the respective row in the
survey of routing rules too.

4.7. LCR Routes

LCR routes are part of the LCR rules as we mentioned in the section above.

Summary of Contents for OMEGA Lite


















































































































Search results

Summary of Contents for OMEGA Lite

Reviews:

Related manuals for OMEGA Lite

Brands by name

Popular brands

2N OMEGA Lite, User Manual

Search results

Summary of Contents for OMEGA Lite

Reviews:

Related manuals for OMEGA Lite

Brands by name

Popular brands