2N OMEGA Lite User Manual Download Page 30

Page: 30 / 113



DNS 1

– first DNS IP address.



DNS 2

– second DNS IP address.



Domain

– domain name.

Click on the

Change

item to confirm the changes. It takes some time to set

the values. Please wait for the web browser response.

To restore the state before form opening, push the

Default

item.

4.4. Administration

This chapter describes the setting of general parameters of the
2N

OMEGA Lite Ethernet module and creating of user accounts and right

groups.

4.4.1. General Module Parameters

Click on the

Basic configuration

item in the

Administration

tag to open the

page with the general module parameters. You cannot change the parameter
values in this form. To enter the change mode, click on the

Change

item.

Summary of Contents for OMEGA Lite


















































































































Search results

Summary of Contents for OMEGA Lite

Reviews:

Related manuals for OMEGA Lite

Brands by name

Popular brands

2N OMEGA Lite, User Manual

Search results

Summary of Contents for OMEGA Lite

Reviews:

Related manuals for OMEGA Lite

Brands by name

Popular brands