2N NetSpeaker, Manual

Page: 25 / 124

25
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Profile G.168 8 ms
Profile G.168 16 ms
Profile G.168 32 ms
Profile G.168 64 ms
Profile G.168 128 ms
Delay [ms]
Adaptive suppression
Non-linear processing
Reuse of coefficients
Automatic control
Jitter buffer
Set the parameters in this tag to optimise packet delay fluctuation during network
passage.
Delay [ms]
Depth [ms]
Automatic adaptation
Short adaptation parameters
Low [ms]
High [ms]
Threshold
Miscellaneous
Receive marks in call
Mode – set the supported DTMF receiving mode for calls.
Send marks by INFO method
DTMF – select one of the two DTMF sending modes using the SIP INFO
method. The modes have different formats of the DTMF transmitting
message.
KeepAlive
Period – define the KeepAlive packet sending interval. The default value is
10s.
STUN server
The STUN server helps NAT clients (i.e. PCs behind the firewall) set up
telephone calls with the VoIP provider hosted outside the LAN.
Address – complete the STUN server address (IP or domain name) to be used if
the STUN IP method is selected in the port RTP interface configuration. The
default value is
. stunserver.org
Port – set the port to be used for STUN. The default value is . port 3478
Internet Radio
The Internet radio source allows you to insert URI of the selected radio and set radio
delay (in ms) - characterises the radio buffer size. Radios in the mp3 format are
supported only.