2N NetSpeaker, Manual, Page: 31 / 124

31
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Speaker connection by "Connection"
Click on in the left or floating menu to create a new Create new connection
connection. This adds a row to the "List of connections", which will characterise
connection to one unit. Click on the connection to display the setting 2N NetSpeaker
®
options in the right–hand part of the window; see previous figure.
Figure: 2N NetSpeaker Detection
®
Connection delay – define the waiting time in ms for the next connection
attempt.
IP address – IP address; the default value is 192.168.1.100. 2N NetSpeaker
®
IP port – port for communication; the default value is 6998. 2N NetSpeaker
®
Change password – change the password for 2N NetSpeaker
®
communication.
Once the connection is established, save the setting. Subsequently, the 2N
®
starts searching for speakers in the network automatically. Fig.2 NetSpeaker Server
shows detection – a pictogram with a big plus in 2N NetSpeaker
®
2N NetSpeaker
®
the lower part indicates successful detection and instructs you to Add 2N
®
using Menu –> Add speaker to database. NetSpeaker to the database
Once the speaker is added, the pictogram becomes dark and the plus disappears. Use
the left or floating menu to
or a connection. remove rename
Automatic speaker connection
If the are configured for automatic connection (this configuration is 2N NetSpeakers
®
made possible by the terminal and Telnet connection), you can omit the Create new
step and let the units be detected automatically. Refer connection 2N NetSpeaker
®
to the next figure for automatic connection. Once the speakers are added to the
database, their pictograms become dark and the plus signs disappear.