manualshive.com logo in svg

2N LTE Verso, Configuration Manual

Share
Download
2N LTE Verso Configuration Manual Download Page 78

2N® LTE Verso Configuration Manual

78

 /  

224

•
•

•
•
•

•

•
•

•

•

Display

 

Phone book displayed

 – 

enable/disable display of the phone book function.

Entry Keypad

 – enable the keypad/keypad type.

Disabled

 – disable the keypad.

Regular keypad

 – set the regular keypad type.

Scramble keypad 

– enable/disable keypad button scrambling (random button 

transposing) before every new display to prevent other persons from watching the 

code entered (

Enhanced Security 

licence required).

Language

 – 

set the language for the texts to be displayed. Choose one of the predefined 

languages: English, Czech, German, Italian, French, Spanish, Russian, Finnish, Danish, 
Polish, Dutch, Portuguese, Turkish, Norwegian, Swedish, Thai, Hebrew or a custom 
language.

Prefer Icons to Text

 – the icons on the dosplay will be preferred to the text.

Power saving mode

 – activate the power saving mode in which the display brightness is 

reduced. If no event occurs during two Slideshow screen activation timeouts, the power 
saving mode activation has been successful. Set 0 in the Slideshow screen activation 
timeout to disable the power saving mode. Any movement in front of the intercom camera 
or any display event (such as door lock activation or display touch) restores the full 
brightness of the display.

Showcase Mode

 – set whether the device shall go into the showcase mode when idle. 

Choose various options in the showcase mode (Slideshow, Company Logo, Address).

Delay of Showcase Mode Activation

 –set the idle timeout in the range of 1 to 600 seconds 

after which the device goes into the mode of representation.

Summary of Contents for LTE Verso

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands